A working tool for request analysts and coordinators

FOI request planner: the due date, the fee estimate and the letters for a new request

A request has just arrived. Enter the date, pick your Act and describe the request, and get one plan: the due date and the dates before it, what to ask the requester, a search memo, a fee estimate, what your Act allows for extensions, and the letters with the dates filled in. It also covers a request that reads as if AI drafted it.

Runs in your browser. A request you paste is read on this page only. It is not sent, saved or put in a link, and no AI reads it.

Period the request covers
Parts of the organization that would search
How specific the subject is
Kinds of record asked for
Pages you expect, if you can guess
What the records are likely to hold

Paste the request, choose the answers that describe it, or change the date it arrived. The plan appears here: key dates, what to ask, the fee estimate and the letters.

Every request, not just this one

Keep the plan on the request

In AccessPoint these dates, the fee estimate and the letters sit on the request itself. The clock pauses and restarts where the Act says, an extension picks from your Act's own grounds, the fee comes from the hours logged, and each letter fills in from the request. Try it on the same rules: your Act.

The demo needs no sign-up. The trial is 30 days free, no card, with unlimited users.

The Act's facts are exported from AccessPoint's jurisdiction packs (2026-11-18), researched from public legislation and regulator guidance. The scores and hours are planning estimates. General information, not legal advice: confirm against the Act before you extend, charge or refuse.

What is an FOI request plan?

An FOI request plan is what an access office works out on the day a request arrives, before anyone searches: when the answer is due, whether the request is clear enough to act on, how wide it is, how much work it will take, who else must be asked, and what to say to the requester now. Its purpose is to make the early decisions — clarify, estimate a fee, extend the time limit, give notice — while there is still time for them to help.

Most late responses are decided in the first week. A request sits in the queue as if it were ordinary, the search goes out wide, and by the time anyone sees how much has come back, the time to clarify or extend has passed.

How to plan an FOI request in six steps

  1. Log the request and fix the due date. Enter the date the request arrived and work out the due date under your Act, with weekends and holidays. Set working dates before it for the search, the review and the letter.
  2. Read the request for what needs clarifying. Check it is clear enough to search. Where it is broad or unclear, ask the one or two questions that would narrow it most, and offer a version you could answer quickly.
  3. Send the search out the same day. Send each area that may hold records a memo with the period, the kinds of record and a reply-by date, and ask where they looked and how long it took.
  4. Estimate the fee early. From a sample of the records, work out search time, pages and any free allowance under the Act's fee schedule, and send the estimate before the work runs up.
  5. Check what the Act allows. Find the grounds for extending the time limit and what pauses or restarts the clock, and decide on an extension before the due date.
  6. Send the letters on time. Acknowledge the request, then send the clarification, fee estimate, third-party and extension letters as each is needed, and keep the plan on the file.

How the scope score works

The scope score adds four things you can see in the request itself, each scored from 0 to 3, for a total out of 12.

What is scored0123
Period coveredA month or lessUp to a year1 to 5 yearsOver 5 years, or no dates
Parts of the organization searchingOne2 or 34 to 10More, or everyone
How specific the subject isA named recordOne event or decisionA topic“All records” on a broad subject
Kinds of recordOneTwoThreeFour or more

A score of 0 to 3 is narrow, 4 to 6 moderate, 7 to 9 broad and 10 to 12 very broad.

The four processing tracks

The effort estimate adds search hours, review hours (expected pages divided by the pages your office reviews in an hour) and handling time for notices and consultations. The track follows from it.

TrackWhenHow to handle it
SimpleAbout 5 hours or less, narrow, no noticesAnswer it this week; do not let it wait behind longer requests.
StandardUp to about 20 hours, or any notice or consultationWork it on the normal clock; send the search out the same day.
ComplexOver about 20 hours, several sensitive kinds of record, or a notice with sizeable workPlan notices, consultations and an extension in the first week.
VoluminousOver about 60 hours or 2,000 pagesTalk to the requester before anyone searches.

The hours are planning estimates, and the review rate is an assumption you can change in the tool. US federal agencies use the same idea under the name multitrack processing, with simple, complex and voluminous queues.

Clarifying questions to ask a requester

Under the duty to assist, a public body helps the requester make a request it can answer. Ask only the one or two questions that would narrow the request most:

  • The purpose. What decision, event or issue are you most interested in?
  • The period. What dates should we search?
  • The people. Are there particular departments, offices or people whose records you want?
  • The kinds of record. Final reports and decisions only, or also email, chat messages and drafts?
  • Video and audio. Which dates, times and locations?
  • Questions in the request. Would the records that hold the answer, or an informal answer, meet your need?
  • Many parts. Which part would you like first, or should they be separate requests?

Offer a narrower version you could answer quickly, keep searching where you can while you wait, and send the agreed wording back to the requester in writing.

How to handle an AI-generated FOI request

A request is not invalid because AI helped write it. Access laws do not ask how a request was written, and the UK Information Commissioner's guidance of May 2026 says to handle AI-drafted requests like any other, even where they misstate the law. What changes is the request itself: AI-drafted requests tend to be longer, broader and less focused, can cite the wrong Act or cases that do not exist, and often demand things the law does not provide.

  1. Treat it as valid. Apply the ordinary requirements, and nothing more.
  2. Do not ask whether AI was used, and do not treat it as bad faith. A person can write the same way.
  3. Answer the person in plain words. Say what you can do and correct the law politely, without making a point of it.
  4. Ask the one or two questions that narrow it most, and offer a version you could answer quickly.
  5. Check anything it cites. Sections, cases and commissioner decisions in AI-drafted text are sometimes wrong or invented.
  6. Judge repeated requests by burden and pattern. Many near-identical requests from one source may meet your Act's frivolous or vexatious grounds, but only on evidence of the burden, never because of the tool that wrote them.

How much can a public body charge for an FOI request?

Only what its Act and fee regulation allow, and the answer differs widely. Some Acts charge an application fee and then for the time to find and prepare records and for copies. Some charge only an application fee, or nothing. Some set no fee for staff time but let the body refuse a request that would cost more than a limit to answer. Most give some hours or pages free, exempt requests for a person's own information, and allow a waiver for hardship or the public interest.

How to prepare an FOI fee estimate

  1. Find the fee schedule for your Act. Check the Act and its fee regulation for the application fee, the rates for search, preparation and copies, and who is exempt.
  2. Identify the kind of requester. Many Acts charge differently for a request for one's own personal information, and US federal FOIA sets fees by requester category.
  3. Estimate the search and preparation time. Estimate the hours to find the records and get them ready, subtract any hours the Act gives free, and bill in the Act's unit, rounding a part unit up.
  4. Count the pages. Estimate the pages to be released, subtract any free pages and apply the per-page rate. Records viewed in person usually carry no page charge.
  5. Apply the no-charge threshold and any cap. Where the Act sets an amount at or below which no fee is charged, or a maximum fee, apply it. The application fee is separate.
  6. Send the estimate in writing. Tell the requester the estimate, how it was worked out, any deposit required, and how to ask for a waiver or to narrow the request.

How is an FOI fee estimate calculated?

The planner's fee estimate follows the fee engine in AccessPoint, line by line. The application fee is charged as the Act sets it and is never part of a waiver or a free allowance. Search and preparation time is reduced by any hours the Act gives free, then billed in the Act's own unit — a quarter-hour, a half-hour, an hour — with a part unit rounded up. Review time is charged only where the schedule sets a rate for it. Copies are charged per page after any free pages; records viewed in person carry no page charge. Where the Act sets an amount at or below which no fee is charged, the processing charges drop to nothing when they fall inside it, and the application fee still stands.

Three things it cannot know: the rates your own organization has set where the Act leaves room, charges the Act bills at actual cost (shipping, media, programming), and whether a waiver applies. The schedule in words, beside every result, says where those come in.

FOI fees by jurisdiction

The rates for a general request under each access and public-records Act that sets them. Where an Act has several kinds of requester, the first is shown; the planner has them all.

JurisdictionApplication feeSearch and preparationCopies, a pageFreeUse in the planner
Canada
ABAlberta $25 $6.75 per 15 min $0.25 — Estimate
BCBritish Columbia $10 $7.50 per 15 min $0.25 3 h Estimate
CACanada — Federal $5 — — — Estimate
MBManitoba None $15 per half-hour $0.20 2 h Estimate
NLNewfoundland & Labrador None $25 an hour $0.25 10 h Estimate
NTNorthwest Territories None — $0.10 — Estimate
NSNova Scotia $5 $15 per half-hour $0.20 3 h Estimate
NUNunavut $25 $6.75 per 15 min $0.25 — Estimate
ONOntario — FIPPA (provincial) $5 $7.50 per 15 min $0.20 — Estimate
ONOntario — MFIPPA (municipal) $5 $7.50 per 15 min $0.20 — Estimate
PEPrince Edward Island $5 $15 per half-hour $0.08 3 h Estimate
QCQuébec None — $0.49 20 pages Estimate
SKSaskatchewan None $15 per half-hour $0.25 2 h Estimate
YTYukon None $30 an hour — 5 h Estimate
United States
ALAlabama None $20 an hour $0.50 — Estimate
AKAlaska None — $0.25 5 h Estimate
AZArizona None — $0.25 — Estimate
ARArkansas None — $0.25 — Estimate
CACalifornia None — $0.10 — Estimate
COColorado None $41.37 an hour $0.25 1 h Estimate
CTConnecticut None — $0.25 — Estimate
DEDelaware None — $0.10 1 h, 20 pages Estimate
FLFlorida None — $0.15 — Estimate
GAGeorgia None — $0.10 — Estimate
GUGuam None — $0.02 — Estimate
HIHawaii None $2.50 per 15 min $0.05 — Estimate
ILIllinois None — $0.15 50 pages Estimate
KYKentucky None — $0.10 — Estimate
LALouisiana None — $0.25 — Estimate
MEMaine None $25 an hour $0.10 2 h Estimate
MAMassachusetts None $25 an hour $0.05 2 h Estimate
MIMichigan None — $0.10 — Estimate
MNMinnesota None — $0.25 — Estimate
MSMississippi None — $0.15 — Estimate
MTMontana $5 $25 an hour $0.25 1 h Estimate
NENebraska None $25 an hour $0.25 8 h Estimate
NVNevada None — $0.25 — Estimate
NHNew Hampshire None — $0.25 — Estimate
NJNew Jersey None — $0.05 — Estimate
NMNew Mexico None — $1 — Estimate
NYNew York None — $0.25 2 h Estimate
NDNorth Dakota None $25 an hour $0.25 1 h Estimate
MPNorthern Mariana Islands None — $0.25 — Estimate
OKOklahoma None — $0.25 — Estimate
OROregon None — $0.25 — Estimate
PAPennsylvania None — $0.25 — Estimate
PRPuerto Rico None — $0.25 — Estimate
RIRhode Island None $15 an hour $0.15 1 h Estimate
SDSouth Dakota None — $0.25 1 h Estimate
TNTennessee — TPRA None — $0.15 1 h Estimate
TXTexas None $15 an hour $0.10 — Estimate
VIU.S. Virgin Islands None — $0.25 — Estimate
USUnited States — Federal None $10 per 15 min $0.05 — Estimate
VTVermont None $0.45 a minute $0.05 0.5 h Estimate
WAWashington None — $0.15 — Estimate
WVWest Virginia None — $0.10 — Estimate
WYWyoming None — $0.10 — Estimate
Europe
GIGibraltar £11.50 £11.50 an hour — — Estimate
JEJersey None £40 an hour — — Estimate
BEBelgium — Publicité / Openbaarheid None — €0.05 50 pages Estimate
FRFrance None — €0.18 — Estimate
NONorway — Offentleglova None — NOK 1 100 pages Estimate
CHSwitzerland None CHF 100 an hour — 8 h Estimate
IEIreland None €20 an hour €0.04 — Estimate
SCOScotland None £15 an hour — — Estimate
Rest of World
INIndia INR 10 — INR 2 — Estimate
ZASouth Africa ZAR 100 ZAR 100 an hour ZAR 1.50 1 h Estimate
ACTAustralia — ACT None — $0.35 50 pages Estimate
AUAustralia — Federal None $15 an hour $0.10 — Estimate
NSWAustralia — New South Wales $30 $30 an hour — — Estimate
QLDAustralia — Queensland $59.60 $9.25 per 15 min — 5 h Estimate
SAAustralia — South Australia $44.70 — — — Estimate
TASAustralia — Tasmania $49 — — — Estimate
VICAustralia — Victoria $34.50 — — — Estimate
VICAustralia — Victoria Health Records Act None — $0.20 — Estimate
WAAustralia — Western Australia $30 — — — Estimate
NZNew Zealand None $38 per half-hour $0.20 1 h, 20 pages Estimate
NZNew Zealand — LGOIMA None $38 per half-hour $0.20 1 h, 20 pages Estimate

Sources

Where AccessPoint fits

Scope on the request

The request's scope, estimated hours and pages are recorded on it, so the fee estimate and the plan come from the same figures.

A clock that pauses properly

A clarification or a fee estimate pauses the clock where the Act allows, and the audit trail records each pause and restart.

Your Act's extension grounds

An extension picks from the grounds your Act gives, moves the due date and produces the notice letter.

Structured intake

The public portal's step-by-step request form asks structured scope questions, so more requests arrive ready to work.

See FOI request management in AccessPoint Work a request yourself in the demo, no sign-up (opens the demo in a new tab)

Request planning questions

What does triage mean for an access request?

Triage is the look you give a request on the day it arrives, before anyone searches: is it clear enough to act on, how wide is it, how much work will it take, who else has to be asked, and what should be said to the requester now rather than in week three. Offices that triage sort requests into tracks, such as simple, standard, complex and voluminous, so quick requests are not stuck behind long ones, and they decide early whether to clarify, estimate a fee or extend the time limit.

How are the scope score and the effort estimate worked out?

The scope score adds four things, each from 0 to 3: the period the request covers, how many parts of the organization would have to search, how specific the subject is, and how many kinds of record are asked for. The effort estimate turns your answers into hours: search time grows with the areas, the period and the kinds of record; review time is the expected pages divided by a review rate you can change, slowed where the records hold other people's information, business information or legal advice; and each notice or consultation adds handling time. It is a planning figure to help you decide what to do next, not a measurement.

What questions should I ask to clarify a broad FOI request?

Ask only the one or two questions that would narrow the request most. The useful ones are: what decision, event or issue the person is most interested in; what period to search; which departments or people matter; which kinds of record they need, final documents only or also email, chat and drafts; and, where the request has many parts, which to answer first. Offer a narrower version you could answer quickly, and confirm the agreed wording back to the requester in writing.

Does asking a requester for clarification pause the deadline?

It depends on the Act. Some Acts stop the clock while the public body waits for a clarification it needs to identify the records, some restart it when the answer arrives, and some keep it running throughout. The tool lists the clock pauses and extension grounds for the Act you pick. Record the date you asked and the date the requester replied whatever your Act says.

Is a request invalid if it was written with AI?

No. Access laws do not ask how a request was written, and the UK Information Commissioner's 2026 guidance says so directly: a request drafted with an AI tool is handled like any other unless it fails the ordinary requirements. What changes is the request itself. AI-drafted requests tend to be longer, broader and less focused, and can cite the wrong law or cases that do not exist. The answer is the one the duty to assist already gives: tell the requester plainly what you can do, correct the law politely, and ask the one or two questions that narrow the request.

Does the tool decide whether a request was written by AI?

No, and it does not try to. It points out traits that are common in AI-drafted text, such as unfilled placeholders, stock phrases, long lists of every kind of record and citations to another country's law, because those traits change how much work the request is and what you should ask. A person can write the same way. Handle the content, not the author.

Is the request I paste in sent anywhere?

No. The text is read by the page in your browser to count its parts and spot its traits. It is not sent to Realizer or anyone else, it is not saved, and it is not included in any link. Close the page and it is gone. A request can hold the requester's personal information, so do not paste more than you need.

When can a request be refused as vexatious or as too much work?

Rarely, and only on the grounds your Act gives. Most Acts set a high bar: a pattern of conduct, an abuse of the right of access, or a burden that is unreasonable for the organization, shown with evidence. A broad request, a difficult requester or the use of AI is not enough alone. Clarifying, estimating a fee and extending the time limit come first. The tool lists your Act's grounds where the pack carries them.

How much does an FOI request cost?

It depends on the Act, and often it costs little or nothing. Canada's federal Access to Information Act charges a $5 application fee and nothing else. Ontario charges $5 to apply, then $7.50 for each 15 minutes of search and of preparation and 20 cents a page. The UK charges no fee for staff time but can refuse a request that would cost more than 450 or 600 pounds to answer. US federal FOIA charges by requester category, with the first two hours of search and 100 pages free for most requesters. The table on this page lists the rates for each Act.

Can a public body charge for an access request?

It depends on the Act. Some charge an application fee and then for time and copies: Ontario charges $5 to apply, $7.50 for each 15 minutes of search and of preparation, and 20 cents a page. Some charge almost nothing: Canada's federal Access to Information Act keeps only a $5 application fee. The US federal FOIA charges by the kind of requester, so a news organization pays for copies only and a commercial requester pays for search, review and copies. The UK charges no fee for the work but lets an authority refuse a request that would cost more than a set limit to answer. The calculator applies the rule for the Act you pick and prints the schedule in words beside the numbers.

What is the difference between a fee estimate and the final fee?

An estimate is worked out before the search, from the hours and pages the office expects; the final fee is worked out from the time actually logged and the pages actually released. Most Acts require a written estimate once the fee passes a set amount, many let the office ask for a deposit before it continues, and the final fee should not come as a surprise against the estimate. The planner produces the estimate.

Why does my estimate come to nothing?

Usually for one of three reasons: the Act gives a number of search hours or pages free and your figures are inside them; the Act sets an amount below which no fee is charged, and the total is under it; or the requester is asking for their own personal information, which most Acts exempt from search and preparation fees. The breakdown shows which applied.

Does sending a fee estimate stop the clock?

Under some Acts the response period pauses when a fee estimate or a deposit request goes out and starts again when the requester pays or replies; under others the clock keeps running. Check the Act before you rely on a pause, and record the date the estimate was sent either way. The planner's key dates give the due date under the same Act.

When can a fee be waived?

Most Acts let the head waive or reduce a fee, commonly where paying would cause financial hardship or where releasing the records is in the public interest. Some fees can never be waived, such as Ontario's application fee. The planner prints the waiver rule for the Act and the kind of requester you choose.

Can I rely on this estimate?

Use it as a starting point. The schedules come from AccessPoint's jurisdiction packs, built from public information about each law; they are not legal advice, and fee regulations change. Many public bodies also set their own rates within what the Act allows. Confirm the rates against the regulation and your organization's own fee policy before a fee letter goes out.

Related tools

The FOI deadline calculator adds office closures and a calendar reminder to the due date. The reasonable search checklist covers where to look, the backlog recovery playbook applies the same planning to a whole queue, and the starter kit has the procedures, every letter and a request log for your Act.

Last reviewed: November 2026. General information for access practitioners, not legal advice.

© 2026 Realizer Services Inc. About Privacy Terms Hosted Terms